The float level transmitter comes in two types: the float level
transmitter and the float level controller. The float level
transmitter displays measurements on-site and converts level
changes into a (4~20)mA standard signal output, powered by a
24VDC two-wire system. It is suitable for industries such as
petroleum, chemical, metallurgy, and environmental protection,
providing real-time online measurement and control.
Magnetic Level Gauge
The Magnetic Level Gauge can be used to detect the liquid level
and boundary position of various tower, tank, spherical vessel
and boiler.
Simple structure, intuitive and clear observation, minimal maintenance
Simple structure, intuitive and clear observation, minimal maintenance
Large measurement range, multiple connection methods, not limited
by tank height
Excellent sealing and high reliability, capable of measuring corrosive
liquid levels
Comprehensive detection: can measure liquid levels, interface levels, and provide on-site indication, with options for remote transmitters and level switches
liquid levels
Magnetostrictive Level Transmitter
Magnetostrictive level transmitter is a high-precision product
widely used for process-level measurement. The accuracy is
unaffected by dielectric constant, temperature, or pressure
variations, ensuring high precision and low maintenance.
Non-contact liquid level sensor, ensuring no wear and tear over time
No need for frequent calibration and no regular maintenance required
Capable of providing multiple position and temperature outputs
High resolution, high accuracy, stable, reliable, and fast response
Radar Level Transmitter
The Radar level instruments, available in both contact and
non-contact types, offer multiple models for various working
conditions such as high temperature, high pressure,
anti-corrosion, and universal aiming. They are suitable for use
in metal and non-metal containers, reaction vessels, or solid
silos. Excellent signal-to-noise ratio (SNR) for enhanced echo
quality. Fully sealed design with special anti-corrosion materials
for long-term reliability. Standard (4~20)mA current output with
HART protocol communication
Ultrasonic Level Meter Level Sensor
Ultrasonic liquid level meter is an intelligent non-contact liquid
level measuring instrument used for level monitoring, data
transmission and human-machine communication. It can
meet the liquid level measurement requirements of various
working conditions without touching the industrial medium.
Mass Flowmeter
These instruments provide an ideal solution for measuring
liquids, gases, and slurries in a wide variety of flow applications.
Liquid mass flow and density measurement with accuracy
up to ±0.05% for mass flow and ±0.2 kg/m³ for density,
Capable of measuring extremely small flow rates.
Stable gas flow measurement.
Reliable measurement of gas-liquid two-phase and multiphase
mixed fluids
Supports a wide range of communication protocols
Metal Tube Rotameter
The metal tube rotameter is a variable-area flow instrument
commonly used in industrial automation. Ideal for measuring
the flow of liquids, gases, and steam. It is particularly suited
for low flow rates, small flows, high temperatures, high
pressures, corrosive and non-conductive media.
Vortex Flowmeter
It features a robust design that resists mechanical vibrations,
impacts, and contamination. With no moving parts and
minimal wear, it requires no mechanical maintenance. The
meter provides low pressure loss, high accuracy, easy
installation, and stable performance. Its sensor and signal
converter can be matched freely
Electromagnetic flowmeter
It utilizes advanced manufacturing techniques to ensure sensor
quality, while the converter employs a dedicated high-speed
CPU and advanced signal processing technology for stable
performance, high reliability, and precision.
Capable of measuring minimal flow rates as low as 2L/h
Stable gas flow measurement.
Reliable measurement of gas-liquid two-phase and multiphase
mixed fluids
Supports a wide range of communication protocols
Ultrasonic Flow Transmitter
Each ultrasonic flow meter has two transducers controlled by
a flow computer. One of the transducers is a transmitter
(it sends an ultrasonic sound at a certain frequency), the other
is a receiver. The time it takes to go with the flow minus the time
it takes to go against the flow creates a measure of the speed
of the liquid or gas. The run time difference is proportional to the
velocity of the medium. Used for measuring Liquids and gases
with an enormous temperature range of the medium
Coriolis Mass Flowmeter
Coriolis Mass Flow Meter are the leading meters for precision
flow measurement. The meters offer the most accurate
measurement available for virtually any process fluid, while
exhibiting exceptionally low pressure drop. The meters offer
direct mass flow, volume flow, density, and temperature
measurement of liquids and slurries and without the need
for additional equipment, manual calculations, or estimations.
Turbine Flowmeter
Liquid turbine flowmeter can be used to measure all low
viscosity non-corrosive liquids, such as water, oil, gasoline,
kerosene, diesel and so on. It can measure the liquid rate and
total flow rate of low viscosity. Transmitting distance from
sensor to display instrument up to 1000m. Pressure loss is
small. High accuracy and good repeatability. Vibration
resistance and anti-electromagnetic interference
Flow Switch
Suitable for the gas and liquid measurement. Widely used in
pneumatic and hydraulic systems, flow monitoring for recycled
water, cutting fluid and lubricating oil , run idle pump protection.
No movable parts. Maintenance free and Easy installation.
Suitable for variable diameter demand. Switching value can
be adjusted continuously. Extremely low pressure loss.
Compact structure.
Piston Flow Switch
Mechanical type flow switch with On-line installation for
measuring of gas and liquid. Aluminum or Stainless steel
housing. Small pressure loss 6,Good repeatability and
stain resistance. Suit for small flow range with high accuracy .
Suitable for industrial automation / mechanical
equipment/compressed air industry /refrigeration and air
conditioning .
Pressure Transmitter
High precision, high stability, high reliability, Intrinsically safe
explosion-proof. With special terminal and digital display,
convenient repair, installation, calibration
High temperature pressure transmitter
The products with good reliability,Wide adaptability,product flexibility and diversity,Widely used in petroleum, chemical, metallurgy field pressure, power, hydrology and other industrial process measurement and control.
Differential Pressure Transmitter
High stability, good performance of dynamic measurement, high performance microprocessor, realization of digital data transmission, accurate field equipment diagnosis, remote two-way communication function,Suitable for use in the measurement and control of liquid, gas measuring.
Pressure Sensor
Used for measuring the gauge and absolute pressure in liquids and gases. Operates on the import silicon oil-filledmeasuring principle.the pressure is converted into an electrical signal. Used in Automotive industry, Oil and off-shore industry, Automatic machinery, Standard hydraulic and pneumatic equipments, Engine monitoring and control.
Explosion-proof Electric Contact Pressure Gauge
Used for measuring the gauge and absolute pressure in liquids and gases.
Intelligent Pressure Switch
Piezoresistive type pressure sensor with oil fill diaphragm.